Directions for Recharge:
To charge the mosquito bat just push out the small button given at the bottom of the handle of mosquito bat. A 220V pin will pop out, just plug it into the socket directly and it will charge the mosquito bat.
There is one small RED LED indicator, indicating the status of the charge. Once fully charged, unplug the mosquito bat and push inside 220v round pin.
Please push the button at the side of the handle of the mosquito bat to OFF when not using it, this will save the power of the battery and ensure longer life span of the product(Mosquito Bat)
Always hold the mosquito bat by its handle, be cautious and never touch the net to avoid a high voltage power shock.
Safety and Cautions:
Keep it safe from children, it should not be played by them because of the dangerous high voltage power.
When the mosquito bat is turned ON do not touch the inner net i.e. the center net as it has high voltage power running through it.
To clean off the dead mosquitos stuck in between the nets, just shake the bat few times or you can use long hair soft brush. Do not wipe the mosquito bat with wet cloth or any wet material or wash it with water, so as to avoid short circuit.
Do not use the mosquito bat in the place/location where there are flammable gas and liquids around so as to avoid any dangerous consequences.
Do not turn the mosquito bat ON when charging to avoid short circuit and eventually burning out the internal components. For more safety do not touch the outer layer of the net when mosquito bat is kept for charging.
Please note that the longest duration of charging must not surpass 24 hours. If the mosquito bat is not used for long time then it has to be charged once in every 3 months.
Mosquito bat must be kept in dry place to avoid being affected with damp.